Thickness: 0.1-200mm or as requirement, or as customer’s requirements.
Width: 50mm-2500mm, or as customer’s requirements.
Length: 50mm-8000mm, or as customer’s requirements.
Material: 1050, 1060, 1070, 1080, 1100, 1235, 2011, 2014, 2017, 2024, 2A12, 2A16, 2A06, 3002, 3003, 3004, 3004, 3104, 3204, 3030, 3A21, 5005, 5025, 5040, 5052, 5056, 5083, 5086, 5182, 5754, 5A05, 6003, 6060, 6061, 6082, 6083, 6063, 6061, 7003, 8006, 8011, 8021, 8079.
Standard: JIS, AISI, ASTM, GB, DIN, EN, etc.
Stock: 8000 Ton/Month.
Quality control: Third Part Inspection is acceptable.
Delivery Time: Within 3 days for our stock size, 15-20days for our production.
Aluminum sheet is a very common material with good forming performance, corrosion resistance, weld-ability and medium strength. It is widely used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships’ metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.
1050 aluminum sheet belongs to commercially pure wrought family with a purity of 99.5% Al. It also belongs to 1000 series aluminum alloy, which has better correction resistance than other alloy series. In the 1050 aluminum sheet, in addition to the component Al, 0.4% Fe is added, so 1050 aluminum alloy also has high conductivity. In general, 1050 aluminum sheet properties exhibit high plasticity, strong corrosion resistance, excellent electrical and thermal conductivity, but the strength of 1050 aluminum alloy is low.
| Product name | 1050 Aluminum sheet |
| Material | 1000 Series: 1050,1060,1071,1080,1100,1435,etc. 2000 Series: 2011,2014,2017,2024,2A12,2A16,2A06,etc. 3000 Series: 3002,3003,3004,3104,3204,3030,3A21,etc. 4000 Series: 4A01 5000 Series: 5005,5025,5040,5052,5056,5083,5A05,5754, etc. 6000 Series: 6003,6060, 6061, 6082,6083,6063,6061,etc. 7000 Series: 7003,7005,7050,7075, 7085etc. |
| Standard | ASTM, JIS, SUS, EN, DIN, GB, etc. |
| Thickness | Sheet: 0.1 mm- 2.0mm Normal sheet: 0.15 mm- 2.0mm Medium plate: 6.0 mmt-25.0mm Plate: 25mm-200mm Super thick plate: more than 200mm |
| Width | 50mm-2500mm or as the customer’s request |
| Length | 50mm-8000mm or as the customer’s request |
| Surface | Oxidation, embossed, mill, bright, polished, hair line, brush, sand blast, checkered, etc. |
| OEM Service | Perforated, cutting special size, doing flatness, surface treatment, etc |
| Delivery Time | Within 3 days for our stock size,15-20days for our production |
| MOQ | 5 Ton |
| Sample | Free and available |
| Packaging | Export standard package: bundled wooden box, suit for all kinds of transport, or be required. |
| Container Size | 20ft GP: 5898MM(Length)*2352mm(Width)*2393mm(High) 40ft GP: 12032mm(Length)*2352mm(Width)*2393mm(High) 40ft HC: 12032mm(Length)*2352mm(Width)*2393mm(High) |
| Application | Construction, decoration, hardware, electric appliances, machinery and other industrial andcivil purposes, sucaselectroniccapacitor, compositecooker, rice cooker, refrigerator, computercasting, telecommunication, equipment, lampshade, air conditioner, cosmetics coverand so on. |
| 1050 Chemical Composition | |||||||||||||
| Al | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Pb | Max | Total |
| Margin | 0.25 | 0.4 | 0.05 | 0.05-0.20 | 0.05 | - | - | 0.05 | 0.03 | - | (V0.05) | 0.05 | 0.15 |
1. 1050 aluminum sheet , which belongs to pure aluminum series, has high ductility and reflectivity.
2. 1050 aluminum sheet is a non-heat treatment alloy, which is enhanced by cold working, and has excellent cold workability, solderability and weldability.
3. Compared with metals with higher alloy content, 1050 aluminum sheet mechanical strength is lower, so 1050 aluminum alloy is well suitable for chemical and electrolytic brightening but not in casting.
4. The least important point is that the surface of 1050 aluminum sheet can be anodized. In addition, it has medium strength and excellent processing technology makes 1050 aluminum sheet have a wider range of applications.
1. Cracks, corrosion spots and traces of nitrate are not allowed on the surface.
2. Peeling, bubbles, surface roughness and local mechanical damage with depth less than 8% of the nominal wall thickness of the defect location are allowed on the surface, but the maximum depth of the defect shall not exceed 0.5mm, and the total area of the defect shall not exceed 5% of the total area of the plate.
3. The supplier is allowed to polish the profile longitudinally until the surface is smooth.
4. Other requirements: prepared by the demander and the supplier.
5. The surface of the aluminum plate is bright, without scratches, and the plates pressed out by the machine are few.
We are factory and have plenty of inventory, can meet various needs.
1050 aluminum sheet is commonly used in some places that require high corrosion resistance and formability but not high strength. 1050 aluminum sheet is also industrial aluminum. For example, A typical application is the manufacture of chemical industry containers. In addition,1050 aluminum alloy is used for lithium battery soft connection, pole material, explosion-proof valve, PS board base, heat sink, signage, lamp, reflector, etc.
1. Standard seaworthy export packing, wooden pallets with plastics protection for the coil and sheet;
2. 15-20MT can be loaded into 20’container and 21-24MT is more suitable in 40’container;
3. The other packing can be made based on the customer requirement;
4. Normally, we have four layers of packing: wooden pallets, hardboard, Kraft paper and plastic. And fill more desiccants into package;
5. Eye to wall or eye to sky for coils.
We are factory wholesale price, and the prices are lower than 95% of suppliers. Our professional quotation will help you with your project. Expecting our long-term cooperation. ）
