Thickness: 0.1-200mm or as requirement, or as customer’s requirements.
Width: 50mm-2500mm, or as customer’s requirements.
Length: 50mm-8000mm, or as customer’s requirements.
Material: 1050, 1060, 1070, 1080, 1100, 1235, 2011, 2014, 2017, 2024, 2A12, 2A16, 2A06, 3002, 3003, 3004, 3004, 3104, 3204, 3030, 3A21, 5005, 5025, 5040, 5052, 5056, 5083, 5086, 5182, 5754, 5A05, 6003, 6060, 6061, 6082, 6083, 6063, 6061, 7003, 8006, 8011, 8021, 8079.
Standard: JIS, AISI, ASTM, GB, DIN, EN, etc.
Stock: 8000 Ton/Month.
Quality control: Third Part Inspection is acceptable.
Delivery Time: Within 3 days for our stock size, 15-20days for our production.
Aluminum sheet is a very common material with good forming performance, corrosion resistance, weld-ability and medium strength. It is widely used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships’ metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.
2014 aluminum sheet due to the high content of the main alloy component Cu, so in the 2 series Al-Cu-Mg alloy, its strength is higher and the heat strengthening effect is obvious. Similarly, 2014 aluminum alloy is a hard aluminum alloy, but it is also a wrought aluminum alloy. Overall, 2014 aluminum properties showed good machinability, spot welding and roll welding effects, and extrusion effects. However, in the hot state, the plasticity of the 2014 aluminum sheet is slightly weaker, and the corrosion resistance is also weaker. The surface needs to be coated with aluminum to increase its corrosion resistance. At present, 2014 aluminum alloy is widely used in applications requiring high strength and hardness (including high temperature), such as: heavy aircraft, forgings, thick plates and extruded materials, wheels and structural elements, truck frame and suspension system parts.
| Product name | 2014 Aluminum sheet |
| Material | 1000 Series: 1050,1060,1071,1080,1100,1435,etc. 2000 Series: 2011,2014,2017,2024,2A12,2A16,2A06,etc. 3000 Series: 3002,3003,3004,3104,3204,3030,3A21,etc. 4000 Series: 4A01 5000 Series: 5005,5025,5040,5052,5056,5083,5A05,5754, etc. 6000 Series: 6003,6060, 6061, 6082,6083,6063,6061,etc. 7000 Series: 7003,7005,7050,7075, 7085etc. |
| Standard | ASTM, JIS, SUS, EN, DIN, GB, etc. |
| Thickness | Sheet: 0.1 mm- 2.0mm Normal sheet: 0.15 mm- 2.0mm Medium plate: 6.0 mmt-25.0mm Plate: 25mm-200mm Super thick plate: more than 200mm |
| Width | 50mm-2500mm or as the customer’s request |
| Length | 50mm-8000mm or as the customer’s request |
| Surface | Oxidation, embossed, mill, bright, polished, hair line, brush, sand blast, checkered, etc. |
| OEM Service | Perforated, cutting special size, doing flatness, surface treatment, etc |
| Delivery Time | Within 3 days for our stock size,15-20days for our production |
| MOQ | 5 Ton |
| Sample | Free and available |
| Packaging | Export standard package: bundled wooden box, suit for all kinds of transport, or be required. |
| Container Size | 20ft GP: 5898MM(Length)*2352mm(Width)*2393mm(High) 40ft GP: 12032mm(Length)*2352mm(Width)*2393mm(High) 40ft HC: 12032mm(Length)*2352mm(Width)*2393mm(High) |
| Application | Construction, decoration, hardware, electric appliances, machinery and other industrial andcivil purposes, sucaselectroniccapacitor, compositecooker, rice cooker, refrigerator, computercasting, telecommunication, equipment, lampshade, air conditioner, cosmetics coverand so on. |
| 2014 Chemical Composition | |||||||||||||
| Al | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Pb | Max | Total |
| Margin | 0.5-1.2 | 0.5 | 3.9-5.0 | 0.40-1.20 | 0.20-0.80 | 0.1 | - | 0.25 | 0.15 | - | - | 0.05 | 0.15 |
1. Weldability. The contact welding, spot welding and roll welding of 2014 aluminum sheet are good, but arc welding and gas welding are not ideal.
2. Machinability. Similarly, the 2014 aluminum alloy can perform turning, milling, boring, planing and other mechanical processing at the maximum speed that most machine tools can reach.
3. Squeezable. It is worth mentioning, 2014 aluminum sheet is one of the few plates in the 2 series alloy that has an extrusion effect, It is well extruded into various extruded materials and widely used.
4. Mechanical Properties. 2014 aluminum alloy has tensile strength≥440MPa, elongation≥10 (%), which is under AISI standard.
1. Cracks, corrosion spots and traces of nitrate are not allowed on the surface.
2. Peeling, bubbles, surface roughness and local mechanical damage with depth less than 8% of the nominal wall thickness of the defect location are allowed on the surface, but the maximum depth of the defect shall not exceed 0.5mm, and the total area of the defect shall not exceed 5% of the total area of the plate.
3. The supplier is allowed to polish the profile longitudinally until the surface is smooth.
4. Other requirements: prepared by the demander and the supplier.
5. The surface of the aluminum plate is bright, without scratches, and the plates pressed out by the machine are few.
We are factory and have plenty of inventory, can meet various needs.
Conventional Application
There are many general applications of 2014 aluminum sheet, including molds, rivets, high-strength structural parts, thick plates, heavy forgings, extruded materials, truck wheels, truck frame and suspension system parts, multi-stage rocket first-stage fuel tank, aerospace parts, other occasions requiring high strength and hardness (including high temperature). Besides, it was also used in the fields of oxygen production equipment and shipbuilding,etc.
2014 Aluminum Sheet for Aircraft Manufacturing
2014 aluminum sheet, as 2 series aluminum for aerospace, is widely used in aircraft structure manufacturing, such as aircraft skins, skeletons, ribs, bulkheads, etc., propeller elements and other aerospace equipment structural parts.
1. Standard seaworthy export packing, wooden pallets with plastics protection for the coil and sheet;
2. 15-20MT can be loaded into 20’container and 21-24MT is more suitable in 40’container;
3. The other packing can be made based on the customer requirement;
4. Normally, we have four layers of packing: wooden pallets, hardboard, Kraft paper and plastic. And fill more desiccants into package;
5. Eye to wall or eye to sky for coils.
We are factory wholesale price, and the prices are lower than 95% of suppliers. Our professional quotation will help you with your project. Expecting our long-term cooperation. ）
