Thickness: 0.1-200mm or as requirement, or as customer’s requirements.
Width: 50mm-2500mm, or as customer’s requirements.
Length: 50mm-8000mm, or as customer’s requirements.
Material: 1050, 1060, 1070, 1080, 1100, 1235, 2011, 2014, 2017, 2024, 2A12, 2A16, 2A06, 3002, 3003, 3004, 3004, 3104, 3204, 3030, 3A21, 5005, 5025, 5040, 5052, 5056, 5083, 5086, 5182, 5754, 5A05, 6003, 6060, 6061, 6082, 6083, 6063, 6061, 7003, 8006, 8011, 8021, 8079.
Standard: JIS, AISI, ASTM, GB, DIN, EN, etc.
Stock: 8000 Ton/Month.
Quality control: Third Part Inspection is acceptable.
Delivery Time: Within 3 days for our stock size, 15-20days for our production.
Aluminum sheet is a very common material with good forming performance, corrosion resistance, weld-ability and medium strength. It is widely used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships’ metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.
7075 aluminum sheet belongs to Al-Zn-Mg-Cu superduralumin, which is a cold-treated forging alloy with high strength and hardness, far better than soft steel. Due to the fine grain structure inside 7075 aluminum alloy, it has excellent deep drilling performance, enhanced wear resistance of tools, good mechanical properties and anode reaction. At present, 7075 aluminum sheet is the preferred metal material under the requirement of lightweight conditions with lower density and higher hardness. It is one of the most potential alloys for commercial use. And It is widely used in the manufacturing of shoe mold, high-hardness mold, high-end mobile phone shell, thick plate, heavy forging and golf components, precision parts and aircraft.
| Product name | 7075 Aluminum sheet |
| Material | 1000 Series: 1050,1060,1071,1080,1100,1435,etc. 2000 Series: 2011,2014,2017,2024,2A12,2A16,2A06,etc. 3000 Series: 3002,3003,3004,3104,3204,3030,3A21,etc. 4000 Series: 4A01 5000 Series: 5005,5025,5040,5052,5056,5083,5A05,5754, etc. 6000 Series: 6003,6060, 6061, 6082,6083,6063,6061,etc. 7000 Series: 7003,7005,7050,7075, 7085etc. |
| Standard | ASTM, JIS, SUS, EN, DIN, GB, etc. |
| Thickness | Sheet: 0.1 mm- 2.0mm Normal sheet: 0.15 mm- 2.0mm Medium plate: 6.0 mmt-25.0mm Plate: 25mm-200mm Super thick plate: more than 200mm |
| Width | 50mm-2500mm or as the customer’s request |
| Length | 50mm-8000mm or as the customer’s request |
| Surface | Oxidation, embossed, mill, bright, polished, hair line, brush, sand blast, checkered, etc. |
| OEM Service | Perforated, cutting special size, doing flatness, surface treatment, etc |
| Delivery Time | Within 3 days for our stock size,15-20days for our production |
| MOQ | 5 Ton |
| Sample | Free and available |
| Packaging | Export standard package: bundled wooden box, suit for all kinds of transport, or be required. |
| Container Size | 20ft GP: 5898MM(Length)*2352mm(Width)*2393mm(High) 40ft GP: 12032mm(Length)*2352mm(Width)*2393mm(High) 40ft HC: 12032mm(Length)*2352mm(Width)*2393mm(High) |
| Application | Construction, decoration, hardware, electric appliances, machinery and other industrial andcivil purposes, sucaselectroniccapacitor, compositecooker, rice cooker, refrigerator, computercasting, telecommunication, equipment, lampshade, air conditioner, cosmetics coverand so on. |
| 7075 Chemical Composition | |||||||||||||
| Al | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Pb | Max | Total |
| Margin | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | - | - | 0.05 | 0.15 |
1. High Intensity. 7075 aluminum sheet is stronger than mild steel. After solution treatment, the plasticity is good, with high strength below 150℃ and excellent low temperature strength.
2. Strong Stress Corrosion. The stress corrosion performance of 7075 aluminum shee is better than that of 7A04, especially in the temper of 7075-t651.
3. Good Heat Treatment Strengthenin Effect. Zn is the main alloy element in 7075 aluminum sheet. Mg is added to the alloy containing 3%-7.5% Zn, so that the heat treatment strengthening effect of 7075 aluminum alloy is far better than that of Al-Zn binary alloy.
4. Other features. The plasticity under annealing and hardening conditions is slightly lower than 2A12 in the same state, but slightly better than 7A04, etc.
1. Cracks, corrosion spots and traces of nitrate are not allowed on the surface.
2. Peeling, bubbles, surface roughness and local mechanical damage with depth less than 8% of the nominal wall thickness of the defect location are allowed on the surface, but the maximum depth of the defect shall not exceed 0.5mm, and the total area of the defect shall not exceed 5% of the total area of the plate.
3. The supplier is allowed to polish the profile longitudinally until the surface is smooth.
4. Other requirements: prepared by the demander and the supplier.
5. The surface of the aluminum plate is bright, without scratches, and the plates pressed out by the machine are few.
We are factory and have plenty of inventory, can meet various needs.
7075 Aluminum Sheet Uses
For the manufacture of aircraft structures and other high-stress structures with high strength and corrosion resistance, such as upper and lower wing panels, trusses and spacers. In addition, 7075 aluminum sheet is also used to make high-end mobile phone casings, precision components, golf components and other products.
Medium Thick Aluminum Plate Uses
7075 medium thick aluminum plate is suitable for high hardness mold, shoe mold, heavy forging, high strength parts and other fields, the products provide the original factory warranty, the global export, can be assured to purchase!
1. Standard seaworthy export packing, wooden pallets with plastics protection for the coil and sheet;
2. 15-20MT can be loaded into 20’container and 21-24MT is more suitable in 40’container;
3. The other packing can be made based on the customer requirement;
4. Normally, we have four layers of packing: wooden pallets, hardboard, Kraft paper and plastic. And fill more desiccants into package;
5. Eye to wall or eye to sky for coils.
We are factory wholesale price, and the prices are lower than 95% of suppliers. Our professional quotation will help you with your project. Expecting our long-term cooperation. ）
